{"repo":"tjko/brickpico","free":true,"listed":false,"github":"https://github.com/tjko/brickpico","clone":"git clone https://github.com/tjko/brickpico.git","description":"BrickPico - Open Source LED Light Controller","language":"C","stars":17,"topics":["firmware","hardware","led-controller","open-source","open-source-hardware","oshw","pwm","raspberry-pi","raspberry-pi-pico","rp2040"],"license":"GPL-3.0","category":"self-hosted-apps","readme_excerpt":"Brickpico: Smart PWM LED Controller Bricpico is a smart PWM LED controller based around Raspberry Pi Pico (RP2040 MCU). Brickpico is mainly meant to controlling various LED lights on LEGO models, but can be used to control any LED lights (or other small loads). Brickpico operates as standalone controller that incorporates programmable timer to turn lights on/off on a schedule. BrickPico is an Open-source hardware (OSHW) project. Features Controls up to 8 to 16 separete channels (LED group) Adjustable output brightness (via PWM) Adjustable output voltage 5V or 3.3V Up to 200mA current output per port (each port has resettable fuse). Programmable PWM frequency from 10 to 100000 Hz Configurable Lightness/Gamma correction Support for configurable lighting \"effects\" on each channel Connectors for common Lego light kits (Light My Bricks, etc.) as well as 2.54mm pin header. I2C OLED display module support (128x64 or 128x128) I2C Enviromental sensor support (up to 8 sensors) Configuration stored on the device itself (in the flash memory). SCPI \"like\" programming interface (see Command Reference) WiFi support if opting to mount Pico W on the board. HTTP server for monitoring. MQTT support for sending status and to receive commands. Home Assistant (MQTT Discovery) support Telnet server for remote configuration and monitoring. SSH server for remote configuration and monitoring. Interfaces Serial \"Console\". Primary method for configuring/monitoring FanPico units is via (USB) Serial conso","default_branch":null,"files":null,"tree":[],"storefront":"/r/tjko","claimed":false,"request_supported":{"post":"https://gitbuyer.com/r/tjko/brickpico/request-supported","requests":0},"note":"indexed from public GitHub; nothing is for sale on this page. Clone it from GitHub. Paid listings live at /search."}