{"repo":"ndoornekamp/senseair_s8","free":true,"listed":false,"github":"https://github.com/ndoornekamp/senseair_s8","clone":"git clone https://github.com/ndoornekamp/senseair_s8.git","description":"Python module for reading CO2 concentration from a Senseair S8 sensor connected to a Raspberry Pi","language":"Python","stars":16,"topics":["raspberry-pi","senseair-s8","co2","co2-sensor","python","python-3"],"license":"MIT","category":"cli-tools","readme_excerpt":"Senseair S8 for Python Python module for reading CO2 concentration from a Senseair S8 sensor connected to a Raspberry Pi Connecting the Senseair S8 to your Raspberry Pi Hook up the Senseair S8 to your Raspberry Pi using the following schematic: Image source: Module installation Usage As a module: From the command line (this logs the CO2 concentration at 1 second intervals): Troubleshooting - This module expects the sensor to be connected to port /dev/ttyS0 . It was only tested using that port, but you can override this setting when initializing the sensor: - Out of the box, /dev/ttyS0 is disabled on a Raspberry Pi, resulting in a permission denied error. You can enable it by: 1. Run sudo raspi-config 2. Select Interfacing options 3. Select P6 Serial 4. Select No for login console 5. Select Yes for serial port hardware 6. OK, Finish, Reboot - Yes","default_branch":null,"files":null,"tree":[],"storefront":"/r/ndoornekamp","claimed":false,"request_supported":{"post":"https://gitbuyer.com/r/ndoornekamp/senseair_s8/request-supported","requests":0},"note":"indexed from public GitHub; nothing is for sale on this page. Clone it from GitHub. Paid listings live at /search."}