{"repo":"BrushlessPower/SBUS2-Telemetry","free":true,"listed":false,"github":"https://github.com/BrushlessPower/SBUS2-Telemetry","clone":"git clone https://github.com/BrushlessPower/SBUS2-Telemetry.git","description":"Arduino Library for SBUS and SBUS2 with Futaba Telemetry","language":"C++","stars":100,"topics":["sbus2","sbus","futaba","fasstest","telemetry","esp32"],"license":"GPL-3.0","category":"analytics","readme_excerpt":"SBUS2-Telemetry Library Arduino Library for receiving SBUS and SBUS2 Frames and transmit Telemetry Data - with Atmega328P MCU - The Library uses the U(S)ART Interrupt and Timer2 - You can't use Serial in your Sketch! Please use Softserial instead. - with ESP32 - The Library uses Serial1 (UART NUM 1) and TIMER 1 in TIMER GROUP 0 - RX1 = GPIO NUM 25 and TX1 = GPIO NUM 26 - Serial, Timer and RX/TX Pins can be changed Setting up the Example Sketch - Before you start flashing and coding, please Setup you Futaba Radio Control - Select Modulation- FASSTest - 14CH and bind your Receiver - You should see the SerialNumber of the Receiver - In Telemetry Screen, you should see the RX Voltage - Got to \"Sensors\" Menu and activate the Inactive Slots - See #defines in the example Sketch - #define TEMPRATURE SLOT 1 - Set Slot1 (Inactive) to Temp125 Sensor - Do the same with all other Sensors defined in the Example Sketch - Build up you Arduino Hardware with Atmega328P - Build your Inverter Circuit - Flash the Sktech - On Arduino Pro Mini you must flash without attached Inverter! - Attach The Inverter to RX and TX on the Arduino Board - Attach the Inverter to SBUS2 Port on your Receiver - Build up you Arduino Hardware with ESP32 - Place 1k between your RX1 and TX1 Pins - Attach the SBUS2 Port to RX1 Pin - Flash the Sktech - Power up - You can power your Futaba Receiver from Arduino (5V) - Or you power your Arduino from Futaba Receiver (BEC) - You will See Telemetry Data on your Telemetry Scree","default_branch":null,"files":null,"tree":[],"storefront":"/r/BrushlessPower","claimed":false,"request_supported":{"post":"https://gitbuyer.com/r/BrushlessPower/SBUS2-Telemetry/request-supported","requests":0},"note":"indexed from public GitHub; nothing is for sale on this page. Clone it from GitHub. Paid listings live at /search."}